Safety Induction Socialization at The Pakupatan Untirta Campus to Create a Safe Campus

Authors

  • Ade Sri Mariawati Industrial Engineering, Faculty of Engineering, Sultan Ageng Tirtayasa University
  • Lely Herlina Industrial Engineering, Faculty of Engineering, Sultan Ageng Tirtayasa University
  • Nustin Merdiana Dewantari Industrial Engineering, Faculty of Engineering, Sultan Ageng Tirtayasa University

DOI:

https://doi.org/10.35568/abdimas.v8i2.6275

Keywords:

security and safety, safety induction, campus, risk

Abstract

Security and safety on campus are significant aspects of creating a conducive environment for the learning process. Pakupatan Untirta Campus, as a place inhabited by students, lecturers, and staff, has potential risks that can threaten safety. Therefore, socialization regarding safety induction is needed to equip the academic community with knowledge regarding preventive measures, evacuation procedures, use of safety equipment, and emergency steps that must be taken in various risky situations. This study aims to provide comprehensive knowledge to the academic community regarding safety and to create a safe campus. The methods used in this study include four steps: identifying safety risks, determining gathering points, creating evacuation routes, and creating safety induction videos as a means of socialization. The results showed that of the 11 buildings on the Pakupatan Campus, only six were equipped with light fire extinguishers (APAR). The designated gathering point is on the sports field, an area of 1,215 m². The layout for the evacuation route has also been clearly described. In addition, a safety induction video was crafted to support the socialization of safety on campus. In conclusion, this community service program was successfully implemented and presents a significant contribution to increasing understanding and awareness of safety on the Pakupatan Untirta Campus.

Downloads

Download data is not yet available.

References

Abadi Nugroho, A. N. (2020). Penerapan Metode Haversine Formula Untuk Penentuan Titik Kumpul pada Aplikasi Tanggap Bencana. Metik Jurnal, 4(2), 69–75. https://doi.org/10.47002/metik.v4i2.190

Ajmal, M., Isha, A. S. N., Nordin, S. M., Rasheed, S., Al-Mekhlafi, A. B. A., & Naji, G. M. A. (2022). Safety management and safety outcomes in oil and gas industry in Malaysia: Safety compliance as a mediator. Process Safety Progress, 41(S1), S10–S16. https://doi.org/10.1002/prs.12345

Barbosa, C., Azevedo, R., & Rodrigues, M. A. (2019). Occupational safety and health performance indicators in SMEs: A literature review. Work, 64(2), 217–227. https://doi.org/10.3233/WOR-192988

Bharata, W., Annisa, S., & Qalbi, N. A. (2023). Sosialisasi Program Safety Induction Pada Mahasiswa Administrasi Bisnis Universitas Mulawarman. JMM (Jurnal Masyarakat Mandiri), 7(3), 2899. https://doi.org/10.31764/jmm.v7i3.15063

Eka Rosanti, Ratih Andhika Akbar Rahma, & Bambang Setyo Utomo. (2024). Electrical Safety Education: Implementation of Electrical Safety for Diesel Operators at Pondok Modern Darussalam Gontor. ABDIMAS: Jurnal Pengabdian Masyarakat, 7(1), 145–155. https://doi.org/10.35568/abdimas.v7i1.4228

Fath, R. M. (2020). Pemberian Safety Induction pada Pengguna Gedung Pertemuan terhadap Peningkatan Pengetahuan dan Sikap Risriki. Higeia Journal of Public Health, 4(Special 1), 25–36.

Marhavilas, P., Koulouriotis, D., Nikolaou, I., & Tsotoulidou, S. (2018). International occupational health and safety management-systems standards as a frame for the sustainability: Mapping the territory. Sustainability (Switzerland), 10(10). https://doi.org/10.3390/su10103663

Muhammad Navis Mirza, Arina Nuraliza Romas, & Arif Syaifudin. (2024). Peningkatan Awareness K3 dan Tanggap Darurat Melalui Pembuatan Video Safety Induction di SMAS Miftahul Huda. Media Abdimas, 3(1), 29–34. https://doi.org/10.37817/mediaabdimas.v4i1.3610

Nabila, S., & Fasya Zakkiy Hakim, A. (2024). Diseminasi Pengembangan Safety Induction Video Sebagai Penerapan Safety Culture Di Lingkungan Kerja. Jurnal Kesehatan Masyarakat, 1(2), 2022–2025.

Nabilul Fawaid, Abdul Hakim Zakkiy Fasya, & Gatut Dirgantara. (2023). Implementasi Safety Induction untuk Meningkatkan Kesadaran Keselamatan Kerja di Lingkungan ULP Gedangan Sidoarjo. Jurnal Kesehatan Masyarakat Indonesia (JKMI), 1(2), 57–60. https://doi.org/10.62017/jkmi.v1i2.634

Nilamsari, N., Wahyu Kusuma Wardani, R., & Dyah Eka Noviyanti, U. (2022). Pengenalan Safety Induction pada pengunjung Edu Wisata Lontar Sewu di Desa Hendrosari Gresik sebagai Upaya Perlindungan Keselamatan Berwisata. J-Dinamika : Jurnal Pengabdian Masyarakat, 7(3), 441–445. https://doi.org/10.25047/j-dinamika.v7i3.3606

Nugroho, M. H., Arnandha, Y., & Rakhmawati, A. (2021). Analisis Peta Jalur Evakuasi Dan Penentuan Titik Kumpul Dengan Metode Algoritma Dijkstra(Studi Kasus: Gedung Universitas Tidar Kampus Tuguran). Jurnal Rekayasa Infrastruktur Sipil, 1(2), 3–8. https://doi.org/10.31002/.v1i2.3520

Pratama, A. Y., Susanto, I., Huda, F., & Alim, M. (2024). Increasing Awareness and Efficacy Regarding Farmer Occupational Safety and Food Safety in the Coconut Sugar Production Process at the Gendis Asri Farmer Group , Pernasidi Village. 4, 1995–2005.

Santiasih, I., Dika Rahayu Widiana, Ryan Yudha Aditya, Adhi Setiawan, Vivin Setiani, Indaryani, S., Yoga Dwikurniawan, & Nastiti, V. (2024). The Training in Early Fire Fighting Using Portable Fire Extinguishers at Penjaringan Sari, Surabaya. ABDIMAS: Jurnal Pengabdian Masyarakat, 7(2), 674–681. https://doi.org/10.35568/abdimas.v7i2.4150

Satish, R., Murugabhoopathy, K., Rajendhiran, N., & Vijayan, V. (2020). Technology strategy for improved safety management in steel industry. Materials Today: Proceedings, 33(xxxx), 2660–2664. https://doi.org/10.1016/j.matpr.2020.01.224.

Downloads

Published

2025-04-30

How to Cite

Safety Induction Socialization at The Pakupatan Untirta Campus to Create a Safe Campus. (2025). ABDIMAS: Jurnal Pengabdian Masyarakat, 8(2), 832-840. https://doi.org/10.35568/abdimas.v8i2.6275