Automatic Machine of Distributed Fish Feed Based on Arduino Uno

Sentot Novianto; Supriyadi; Abigunto Amoro Adji; Larasati Rizky Putri; Rangga Komara; Amrullah Gilang; Jesika Erventy; Maria Stevanie Dwi; Aditya Pradika; Ezra Halomoan

doi:10.35568/abdimas.v6i4.4027

Authors

Sentot Novianto Department of Mechanical Engineering, Universitas Trisakti, Jakarta, Indonesia
Supriyadi Department of Mechanical Engineering, Universitas Trisakti, Jakarta, Indonesia
Abigunto Amoro Adji Department of Mechanical Engineering, Universitas Trisakti, Jakarta, Indonesia
Larasati Rizky Putri Department of Mechanical Engineering, Universitas Trisakti, Jakarta, Indonesia
Rangga Komara Department of Mechanical Engineering, Universitas Trisakti, Jakarta, Indonesia
Amrullah Gilang Department of Mechanical Engineering, Universitas Trisakti, Jakarta, Indonesia
Jesika Erventy Department of Mechanical Engineering, Universitas Trisakti, Jakarta, Indonesia
Maria Stevanie Dwi Department of Mechanical Engineering, Universitas Trisakti, Jakarta, Indonesia
Aditya Pradika Department of Mechanical Engineering, Universitas Trisakti, Jakarta, Indonesia
Ezra Halomoan Department of Mechanical Engineering, Universitas Trisakti, Jakarta, Indonesia

DOI:

https://doi.org/10.35568/abdimas.v6i4.4027

Keywords:

automatic, fish feed, spreader, fish pool

Abstract

The need for feed in fish-keeping ponds is vital for the survival of the fish that are kept. Some fishpond farmers still provide fish feed manually and it is felt to be inefficient. On the other hand, the focus of farmers can be focused on maintaining fishponds. This PKM activity utilizes appropriate technology as an automatic feed tool for spreading tilapia fish feed. The driving of this feed is connected to a controller which functions to regulate the spreader of tilapia feed regularly and the design is made to achieve the spread of tilapia feed with a large capacity of 50 kg each e day. The use of this tool was conducted in tilapia fish maintenance/cultivation using ponds/ponds on land. The placement location is in the Karawang sub-district, West Java.

Downloads

Download data is not yet available.

References

Badamasi, Y. A. (2014, September). The working principle of an Arduino. In 2014 11th International Conference on electronics, computer and computation (ICECCO) (pp. 1-4). IEEE.

Erlania, R., Prasetio, A. B., & Haryadi, J. (2010). Dampak manajemen pakan dari kegiatan budidaya ikan nila (Oreochromis niloticus) di keramba jaring apung terhadap kualitas perairan Danau Maninjau. In Prosiding forum inovasi teknologi akuakultur (pp. 621-631).

Fauzia, S. R., & Suseno, S. H. (2020). Resirkulasi Air untuk Optimalisasi Kualitas Air Budidaya Ikan Nila Nirwana (Oreochromis niloticus). Jurnal Pusat Inovasi Masyarakat (PIM), 2(5), 887-892.

Galadima, A. A. (2014, September). Arduino as a learning tool. In 2014 11th International Conference on Electronics, Computer and Computation (ICECCO) (pp. 1-4). IEEE.

Gunawan, A., & Sekamdo, M. A. (2022). Inovasi Teknologi Budidaya Ikan Yang Berkelanjutan Di Provinsi Sumatera Utara. ABDI SABHA (Jurnal Pengabdian kepada Masyarakat), 3(2), 301-308.

Hasan, H., Afifa, N., Maulana, I., Elihami, E., & Aminullah, A. (2020). Budidaya Ikan Nila pada Kolam Tanah. Maspul Journal Of Community Empowerment, 2(2), 24-33.

Kushner, D. (2011). The making of arduino. IEEE spectrum, 26, 1-7.

Oktrialdi, B., Harahap, P., Dewi, I., & Frapanti, S. (2022). Penerapan Solar Cell Pada Bkm Muhammadiyah Di Kota Medan Untuk Penunjang Program Budikdamber (Budidaya Ikan Dalam Ember). ABDI SABHA (Jurnal Pengabdian kepada Masyarakat), 3(2), 309-320.

R.S. Khurmi, J.K. Gupta. (2005). A Textbook of Machine Design. New Dehli: Eurasia Publishing House (PPVT) Ltd.

Hendi Saryanto, Darwin Sebayang. (2015). Proses Desain Elemen Mesin Menggunakan Solidwork. Yogyakarta: Andi.

Church A.H. (Alih Bahasa: Zulkifli), 1990, Pompa dan Blower Sentrifugal, Erlangga, Jakarta.

Rajput R.K., 2002, A Textbook of Fluid Mechanics and Hydraulics Machines, S. Chand & Company Ltd, New Delhi.